Scosche CJ1282B Manual download pdf (Page 6)

1990-93 Chrysler Fifth Avenue/Imperial

1988-93 Chrysler New Yorker

1988-93 Dodge Dynasty

Radio Removal:

1. Remove five screws from along the top side of the

radio/instrument panel dash trim.

2. Lower the steering column, place the gear selector

in drive, then remove the trim panel.

3. Remove two bolts securing the radio, and pull the

radio out, disconnect wire harnesses, ground strap

and antenna lead, then remove the radio.

1979-89 Chrysler Fifth Avenue

1977-81 Chrysler Le Baron

1977-89 Dodge Diplomat

1980-89 Plymouth Gran Fury

Radio Removal:

1. Remove four screws from the top edge of the dash

panel and four screws from the bottom edge.

Remove the panel.

2. Remove two screws securing the radio to the dash

and pull out.

3. Disconnect power, antenna, and all speaker, and

electrical connections.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

1998-01 Dodge Ram Pickup

Radio Removal:

1. Extract (1) Screw from lighter socket area.

2. Carefully pryout on the radio dash bezel to release

the fastening clips, disconnect all connectors and

remove the bezel.

3. Extract the (2) screws securing the radio to the

dash, pull the radio from the dash cavity, unplug all

connectors, diconnect the ground strap and remove

the radio.

1994-97 Dodge Ram PIckup

Radio Removal:

1. Remove the ashtray from the dash, extract the two screws securing the

ashtray bracket to the dash and remove the bracket.

2. Open up the cup holder and extract the two screws securing it to

the dash.

3. Carefully pry out on the perimeter radio dash bezel using a panel

removal tool to release the fastening clips, disconnect all

connectors and remove the bezel.

4. Extract the two screws securing the radio to the dash, pull the radio

from the dash cavity, unplug all connectors, disconnect the ground

strap and remove the radio.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Scosche CJ1282B Manual Page 6

Comments to this Manuals

Related products and manuals for Mounting kits Scosche CJ1282B