Scosche CJ1282B Manual download pdf (Page 12)

Radio Removal:

1. Extract two screws in the trim bezel from just above the radio.

2. Pull the radio trim bezel away from the dash, unplug the ac/

heating control.

3. Extract the two screws securing the radio to the dash, pull the

radio from the cavity, disconnect the ground strap, unplug all

connectors and remove the radio.

1996-00 Chrysler Town & Country

1996-00 Dodge Caravan

1996-00 Plymouth Voyager

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Radio Removal:

1. Using a panel removal tool carefully pry up on the dash panel at the base of the windshield (speaker grille

panel) to release the fastening clips securing it to the dash and pull out on the panel to remove.

2. Pry up the piece of trim that looks like a vent in front of the instrument light cluster on top of the dash

using a panel removal tool to release and remove the trim.

3. Carefully pry out on the trim panel surrounding the heater controls using a panel removal

tool to release the fastening clips securing the trim to the dash and remove the trim.

4. Extract the three screws securing the bottom of the radio trim bezel to the dash.

5. Extract the three screws securing the front of the instrument light cluster to the top of the dash.

6. Extract the screw securing the back of the instrument light cluster to the dash, pry up on the

light cluster with a panel removal tool, unplug all connectors and remove.

Extract the three screws securing the top of the radio trim bezel to the dash on the drivers side of the dash.

8. Pull the radio trim bezel away from the dash, unplug all connectors, shift the gear select lever into Low, tilt

the steering wheel down and remove the bezel.

9. Extract the two screws securing the radio to the dash, pull the radio from the cavity, disconnect the

ground strap unplug all

connectors and remove

the radio.

1994-95 Chrysler Town & Country

1994-95 Dodge Caravan

1994-95 Plymouth Voyager

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

1990 Chrysler Town & Country

1984-90 Dodge Caravan

1984-90 Plymouth Voyager

Radio Removal:

1. Pull firmly outward on the console/radio trim panel -

secured by five metal spring clips, two at the top, two on

the right side and one on the left side.

2. Extract the top two screws from each side of the lower

console - this allows you to slightly spread the console,

providing clearance to remove the radio.

3. Remove the remaining two screws securing the radio,

disconnect the connectors and remove the radio.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

1991-93 Chrysler Town & Country

1991-93 Dodge Caravan

1991-93 Plymouth Voyager

Radio Removal:

1. Remove the cigarette lighter.

2. Using a panel removal tool, carefully pry outward to release

the clips securing the dash bezel and remove the bezel.

3. Extract the two screws securing the rear hatch switch to the

dash bezel.

4. Extract the two 3/8" bolts securing the radio to the dash.

5. Pull the radio out of the dash, and unplug all the connectors.

Disconnect the ground strap and remove the radio.

1 2 ... 7 8 9 10 11 12

Comments to this Manuals

No comments

Scosche CJ1282B Manual Page 12

Comments to this Manuals

Related products and manuals for Mounting kits Scosche CJ1282B