Scosche CJ1282B Manual download pdf (Page 10)

Radio Removal:

1. Starting from the bottom, gently pry outward on the radio trim bezel to

release the two spring clips on the bottom and three across the top.

2. Unplug the lamp harness from the back of the trim bezel and

remove.

3. Extract two screws above radio, one at the lower right

corner behind glove box door, and one screw at the

lower right hand corner below steering column.

4. Remove the trim panel around the radio itself.

5. Extract two hex head screws holding radio in place,

unplug all connectors and unbolt ground strap.

6. Remove radio.

1989-94 Chrysler Le Baron Landau

1994-97 Chrysler LHS

1994-96 Chrysler New Yorker

Radio Removal:

1. Remove the ashtray from the dash.

2. Carefully pry out on the perimeter radio dash bezel

using a panel removal tool to release the fastening

clips and remove the radio dash bezel.

3. Extract the two screws securing the radio to the

dash, pull the radio from the dash cavity, unplug all

connectors and remove the radio.

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS AND DISCARD.

FOR DIN ISO RADIO INSTALLATION, SEE PAGE 3.

Read pages 2-3 for kit assembly.

Radio Removal:

1. Remove four screws from the bottom edge of the radio dash panel.

2. Remove two screws from the top edge of the panel above the

radio location.

3. Unscrew the retainer ring securing the remote mirror control

and remove the panel.

4. Remove two screws securing the radio to the dash. Pull the

radio out.

5. Disconnect power, antenna, and all speaker and electrical

connections.

1974-78 Dodge Charger, Monaco

1978-79 Dodge Magnum

1997-00 Dodge Dakota

Radio Removal:

1. Remove eight screws from the dash trim panel.

2. Remove two screws from the underside of the

steering column trim, and remove the trim.

3. Remove two screws from the radio mounting

bracket, disconnect power antenna, speaker

leads, and all other electrical connections, and

remove the radio.

Read pages 2-3 for kit assembly.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Scosche CJ1282B Manual Page 10

Comments to this Manuals

Related products and manuals for Mounting kits Scosche CJ1282B